Logo
Menu
Contact Us

Environmental Simulation Equipment

Environmental Test Chamber — Complete Guide to Types, Standards & Selection

IEC 60068 · MIL-STD-810 · JEDEC · ICH Q1A

Environmental test chambers — also called climate chambers — reproduce temperature, humidity, and thermal shock conditions that products encounter during storage, transport, and service life. Indeecon has manufacturing the full range of environmental test chambers in India since 1999, supplying electronics, automotive, pharmaceutical, EV, and aerospace manufacturers to qualify products before field deployment.

  • Temperature range −70°C to +180°C with humidity control up to 98% RH
  • Chamber types: bench-top, floor-standing, reach-in, and walk-in configurations
  • NABL-traceable calibration and IQ/OQ documentation on delivery
Selection Guide

Equipment Types

Types of Environmental Test Chambers — Match Your Chamber to Your Test Standard

Selecting the wrong environmental test chamber type is the most common specification error made by buyers in India. Each chamber type is built for a specific test standard — match the standard first, then define your temperature range, chamber volume, and humidity requirement. Indeecon manufactures all chamber types listed below from our facility in Vasai, Maharashtra, with delivery across India.

Temperature & Humidity Chamber

IEC 60068-2-78 / -30

Steady-state and cyclic T&H testing. The most widely used chamber type for component and material qualification.

View equipment

Temperature-Only Chamber

IEC 60068-2-1 / -2

Rapid thermal cycling without humidity control. For dry heat, cold, and temperature-change tests where RH is not required.

View equipment

Thermal Shock Chamber

IEC 60068-2-14

Two-zone basket-transfer design for sub-10-second specimen transitions. Used for solder joint and IC package reliability.

View equipment

Walk-In Chamber

MIL-STD-810 / IEC 60068

Large-specimen testing for vehicle subassemblies, harness looms, and industrial equipment. Custom dimensions available.

View equipment

Dust & IP Test Chamber

IEC 60529 IP5X / IP6X

Talcum powder and fine sand ingress testing per IEC 60529. Validates IP5X and IP6X ratings before market submission.

View equipment

WHO USES ENVIRONMENTAL TEST CHAMBERS

Applications Across Electronics, Automotive, Defence, and Pharma

Indeecon's environmental test chambers and climatic chambers are used across six industries in India — each with specific standard and performance requirements.

Electronics & Semiconductors

PCB reliability, IC packaging qualification, JEDEC JESD22-A101 humidity bias, connector corrosion resistance.

Automotive

Component durability per ISO 16750, AEC-Q qualification, harness and ECU validation for OEM supplier approval.

Aerospace & Defence

MIL-STD-810 environmental qualification — temperature, humidity, and thermal shock for aircraft and missile components.

Pharmaceuticals

ICH Q1A stability testing at 25°C/60% RH (long-term) and 40°C/75% RH (accelerated) for drug shelf-life determination.

Renewable Energy

Solar panel damp-heat and thermal cycling (IEC 61215), EV battery thermal cycling, inverter component qualification.

Research & Materials

Polymer ageing, adhesive bond validation, paint and coating degradation studies, material characterisation.

Standards Coverage

Test Standards These Chambers Support

IEC 60068-2-1/2Cold / Dry heat — basic environmental testing
IEC 60068-2-78Damp heat, steady state
IEC 60068-2-30Damp heat, cyclic (12 h + 12 h)
IEC 60068-2-14Thermal shock — Na/Nb temperature change
MIL-STD-810 G/HMethods 501/502 (temperature) and 507 (humidity)
JEDEC JESD22-A101Humidity bias — IC package moisture sensitivity
ICH Q1APharmaceutical stability — long-term and accelerated
ISO 16750Automotive — road vehicle electrical/electronic equipment

Selection Guide

Not Sure Which Chamber Fits Your Test?

The selection guide walks you through five decision steps — test standard, temperature range, specimen size, humidity requirement, and controller specification — to match the right chamber type and volume to your actual test programme.

Use the Selection Guide

Ingress & Reliability Shortlist

Specialty environmental chambers linked to common test methods

Teams comparing IEC 60529 ingress, combined temperature-humidity exposure, and harsher reliability methods — particularly in automotive, EV, and electronics qualification — usually branch into these product pages next.

Why Indeecon

Built to Specification. Supported by Engineers.

  • Temperature range −70°C to +180°C standard; custom profiles and ramp rates on request
  • NABL-traceable calibration on delivery; IQ/OQ documentation for regulated industries
  • OEM-agnostic spare parts, refrigerant service, and AMC contracts across India
  • PLC controller with programmable profiles, USB export, RS-485 / IoT, and 21 CFR Part 11 option

FAQ

Technical Questions